|
FlowKit 100 Specifications |
|
| |
| Flowkit 100 Specifications: |
| Technology: Calibrated, linearized mass flow meter and efficient, controllable rotary pump |
Range: 5 - 100 liters per minute STP
|
| Accuracy and Resolution: Accuracy better than 2% of full scale typical, resolution 0.1 liter/minute below 100 liters/minute, 1 liter/minute above |
| Control Technology: PID (Proportional Integral Derivative) |
| Alarm: User-settable minimum flow rate triggers an internal acoustic alarm and optionally opens a normally closed relay contact for external alarm/autodialer |
| Analog Output: 0-4V for 0-100 liters/minute, maximum flow voltage 5V for 125 liter/minute, 12 bit resolution |
| Serial Data Output: Comma delimited ASCII string of set and read flow rates, standard RS-232 serial, baud rate 9600, polled or auto-sent at user definable intervals from 0.5 - 600 seconds. Computer control supported in poll mode |
| User Interface: Intuitive menu system backed by nonvolatile memory of user settings |
| Panel Display: Digital 2-line alphanumeric LCD, simultaneous display set and read flow rates |
| Flow Filtration: Replaceable filter on front of unit |
| Tubing Fittings: Main flow: PVC threaded union, 1" diameter, adapters supplied with unit. Subsample flow: Nickel plated barb fitting for 1/8" (3 mm) i.d. flexible or semi-rigid tubing |
| Power Requirements: 12VDC, < 6A. Universal adapter supplied; battery pack available |
| Operating Temperature: 5 - 45 degrees C, relative humidity non-condensing. |
| Size/Weight: UPDATE!!!!!!!13" x 10" x 4" (33 x 25 x 10 cm); less than 10 lbs (4.5 kg). |
| |
|
