| |
| IA-1 Specifications: |
| Technology: Oxygen analysis: Differential fuel cell; CO2 analysis: Non-dispersive dual wavelength infrared; Water vapor analysis: Bulk polymer capacitive sensor; Mass flow measurement and control: Thermal mass flow sensor |
| Body Size Range: Typically arthropods down to < 100 mg body mass in real time; down to < 1 mg in stop-flow mode; upper limit typically mouse or medium lizard, depending on flow rate used and other factors |
| Flow Rate: As set by mass flow control valves and controller. Range depends on your intended application
|
| Flow Regulation: Premium mass flow control valve plus control unit
|
Oxygen Analyzer: Sable Systems Oxzilla II
|
| Carbon Dioxide Analyzer: Optional; Sable Systems CA-10a
|
| Water Vapor Analyzer: Optional; Sable Systems RH-300 |
| Data Acquisition: Sable Systems UI-2 interface and ExpeData software standard |
Data Analysis: Sable Systems ExpeData with full macro capability for automated analysis if desired
|
Technical Support: Free, lifetime
|
Warranty: Three years
|
Setup and Training: Optional, generally not required for experienced investigators
|
| Power Requirements: All instruments accept nominal 12 VDC; 110VAC or 220VAC adapters supplied |
| Operating Temperature: 0 - 45 degrees C, relative humidity non-condensing |
| |
|
