| |
| MA-2 Specifications: |
| Technology: Oxygen analysis: Fuel cell or paramagnetic (user choice); CO2 analysis: Non-dispersive dual wavelength infrared; Water vapor analysis: Bulk polymer capacitive sensor; Mass flow measurement and control: Thermal mass flow sensor |
| Body Size Range: Typically rat to resting human, depending on flow rate used and other factors |
| Flow Rate: 5 - 100 liters/minute standard (Sable Systems FlowKit-100)
|
Flow Regulation: PID (Proportional Integral Derivative) controlling pump directly for minimum pump wear and noise
|
| Oxygen Analyzer: Sable Systems FC-10 (standard), optionally FoxBox or PA-10; or user-supplied analyzer |
Carbon Dioxide Analyzer: Sable Systems CA-10 (standard), optionally FoxBox or user-supplied analyzer
|
| Water Vapor Analyzer: Sable Systems RH-300; or user-supplied analyzer |
| Data Acquisition: Sable Systems UI-2 interface and ExpeData software standard |
Data Analysis: Sable Systems ExpeData with full macro capability for automated analysis if desired
|
Technical Support: Free, lifetime
|
Warranty: Three years
|
Setup and Training: Optional, generally not required for experienced investigators
|
| Power Requirements: All instruments accept nominal 12 VDC; 110VAC or 220VAC adapters supplied |
| Operating Temperature: 0 - 45 degrees C, relative humidity non-condensing |
| |
|
