| |
| PT-200 Specifications: |
| Technology: Silicon piezoresistive sensor with intrinsic temperature compensation |
Range: +/- 2500 Pa and +/- 250 Pa
|
| Accuracy and Resolution: Accuracy better than 0.2% of full scale, resolution 0.1Pa |
Overpressure: 50 kPa maximum
|
Update Rate: 20 Hz
|
Offsetting Capability: Over entire instrument range, plus "floating" offset with 10 sec or 60 sec time constant
|
| Analog Output: Multiple ranges (2000, 1000, 500, 200 and 100 Pa/V plus raw analog signal) for easy connection to analog data acquisition systems |
| Serial Data Output: Comma delimited ASCII string of all measured parameters, standard RS-232 serial, baud rate 115200, polled or auto-sent at user definable intervals from 0.05 - 600 seconds. |
| Digital Filtration: Adjustable from zero to 10 seconds for 0-63% of a step change, in 0.05 second increments |
| Internal A/D Conversion: 16 bits |
| User Interface: Intuitive menu system backed by nonvolatile memory of user settings. Single-click spanning at default span settings |
| Panel Display: Digital 2-line alphanumeric LCD |
Temperature Compensation: Internal to the pressure sensor
|
| Tubing Fittings: Nickel plated barb fittings for 1/8" (3 mm) i.d. flexible or semi-rigid tubing; other fittings available to special order |
| Power Requirements: 9 - 24VDC (12 VDC nominal), < 100 mA. 110VAC or 220VAC adapter supplied |
| Operating Temperature: 5 - 45 degrees C, relative humidity non-condensing |
| Size/Weight: EDIT!!!!!!!!13" x 10" x 4" (33 x 25 x 10 cm); less than 10 lbs (4.5 kg) |
| |
|
