| |
| SI-3 Specifications: |
| Technology: Oxygen analysis: Fuel cell or paramagnetic (user choice); CO2 analysis: Non-dispersive dual wavelength infrared; Water vapor analysis: Bulk polymer capacitive sensor; Mass flow measurement and control: Thermal mass flow sensor |
| Body Size Range: Typically large insect (5g) to Drosophila, depending on flow rate used and other factors |
| Flow Rate: 25 - 200 ml/minute standard (Sable Systems SS-3). Mass flow control valve available on request
|
| Flow Regulation: PWM controlling pump directly for minimum pump wear and noise; or optional mass flow control valve plus pump
|
| Oxygen Analyzer: Sable Systems FC-10 (standard) or PA-10 |
| Carbon Dioxide Analyzer: Optional; Sable Systems CA-10
|
| Water Vapor Analyzer: Optional; Sable Systems RH-300 |
| Scanning: 3, 7, 15 or more animals sequentially; fully automated during data acquisition |
| Baselining: Fully automatic |
| Data Acquisition: Sable Systems UI-2 interface and ExpeData software standard |
Data Analysis: Sable Systems ExpeData with full macro capability for automated analysis if desired
|
Technical Support: Free, lifetime
|
Warranty: Three years
|
Setup and Training: Optional, generally not required for experienced investigators
|
| Power Requirements: All instruments accept nominal 12 VDC; 110VAC or 220VAC adapters supplied |
| Operating Temperature: 0 - 45 degrees C, relative humidity non-condensing |
| |
|
