| |
| SS-2 Specifications: |
| Technology: Oxygen analysis: fuel cell or paramagnetic sensor; CO2 analysis: Non-dispersive dual wavelength infrared; Mass flow measurement and control: Thermal mass flow sensor |
| Sample Range: Typical sample volumes can be from 1 ml to > 1000 ml (please specify desired sample volumes) |
| Flow Rate: As set by mass flow control valves and controller. Typically 50-200 ml/minute |
| Flow Regulation: Premium mass flow control valve plus control unit
|
| Oxygen Analyzer: Optional: Sable Systems FC-10 or PA-10
|
| Carbon Dioxide Analyzer: Sable Systems CA-10
|
| Sample Scanning: Sable Systems RM-8 respirometer multiplexer. Scanning capability: 3, 7, 15, or 23 samples in succession standard; more available if required; please specify desired number |
| Baselining: Fully automated |
| Data Acquisition: Sable Systems UI-2 interface and ExpeData software standard |
Data Analysis: Sable Systems ExpeData with full macro capability for automated analysis if desired
|
Technical Support: Free, lifetime
|
Warranty: Three years
|
Setup and Training: Optional, generally not required for experienced investigators
|
| Power Requirements: All instruments accept nominal 12 VDC; 110VAC or 220VAC adapters supplied |
| Operating Temperature: 0 - 45 degrees C, relative humidity non-condensing |
| |
|
