| |
| TC-2000 Specifications: |
| Technology: Instrument-grade differential inputs and buried reference junction |
| Range: Type T (standard) version: -100 - +125 C. Type K (custom) version: -190 - +750 C |
Accuracy and Resolution: Accuracy 0.2 C maximum. Type T resolution 0.01 C; type K resolution 0.1 C
|
| Noise and Drift: Type T: Noise < 0.01 C RMS without filtration, < 0.01 C peak-peak with 1 sec average; type K < 0.1 C; drift zero (self-zeroing) |
Sampling Rate: 5 Hz; includes reading all thermocouples, and reading zero point and reference temperature
|
| Units: Degrees Celsius, Fahrenheit or Kelvin |
| Operating Modes: Normal (showing all four temperatures at once); differential (showing all four temperatures plus the differentials (channel 1 - channel 2) and (channel 3 - channel 4)), or min-max (showing all four temperatures plus the maximum and minimum temperature measured on each channel since the last reset) |
| Four Analog Outputs: Multiple ranges for easy data acquisition, 16 bits, auto-calibrated and very closely matched |
| Serial Data Output: Standard RS-232 serial, 9600 baud, at user-settable intervals from 0.2 sec to 600 sec |
| Digital Filtration: Adjustable from zero to 50 seconds for 0-63% of a step change, in 0.2 second increments |
| Internal A/D Conversion: 16 bits |
| User Interface: Intuitive menu system backed by nonvolatile memory of user settings |
Panel Display: Digital 4-line alphanumeric LCD, simultaneous display of all measurements
|
Temperature Calibration: Supplied with NIST-traceable calibration. User calibration supported using triple points of mercury, water and gallium plus thermocouple simulation
|
| Thermocouple Type: Type T standard. Type K for wider temperature range available to special order |
| Power Requirements: 6 - 16VDC (12 VDC nominal), < 30 mA. Internal battery pack standard. 110VAC or 220VAC adapter supplied |
| Operating Temperature: 0 - 50 degrees C, relative humidity non-condensing |
| Size/Weight: 6" x 8" x 4"; less than 2 lbs (1 kg) |
| |
