- Fully-integrated respirometry system optimized for field use
- Rugged case with carry handle for maximum portability
- Onboard SD card data storage allows storage of information without a separate computer
- Barometric pressure compensation
- 8 analog inputs for other analyzers or sensors
- Connect recording instruments through 8 analog outputs
- Touch screen control
- New smaller footprint for improved portability
A Rugged, Portable, Fully Integrated Field Metabolic System
The FMS is a fully integrated respirometry system about the size of a briefcase. The FMS combines O2, CO2, and H2O analysis with data acquisition and subsample flow control and measurement. Whether in the lab or field, the FMS has all the versatility needed in a respirometry system without compromising accuracy.
Onboard Data Storage
Capable of onboard data logging using an internal SD card (up to 32 GB).
Accompanied by an external expansion box with eight 0-5V analog inputs to connect other devices to the FMS. The expansion box also provides eight TTL level digital outputs for external device control.
Barometric Pressure Compensation
Standard in our analyzers, barometric pressure compensation eliminates errors caused by ambient pressure variation.
Sable Systems instruments are warranted to be free of defects in material or workmanship for a period of three (3) years from date of purchase. See website for warranty policy.
Lifetime Technical Support
Our technical support team will help you overcome any challenges you may face with equipment setup as well as provide advice and assistance on future applications.
BP-R: For ultimate portability, order a rechargable Li-ion battery pack (4.8 A-H) lasting up to 6 hours run time.
CABLE-B-BC: Cable for use with customer supplied batteries.
Coming Soon! Brochure
Coming Soon! Request User Manual
|Sensor Type||O2 fuel cell; CO2 dual wavelength, non-dispersive infra-red; H2O thin-film capacitive; External Temperature type T thermocouple|
|Oxygen Sensor Life||2 years in normoxia, typical|
|Range||O2 0-100%; CO2 0-5%; H2O 0-100% RH; Temperature 0-100° C|
|Accuracy||O2 0.1% typical, 2-100%; CO2 1% of reading typical over range of 0-5%; H2O 1% typical 0-95% RH, better than 2% 95-100%; Temperature 0.2˚ C|
|Resolution||O2 0.001%; CO2 0.0001%-0.01% depending on concentration; H2O 0.001% RH, 0.01°C dewpoint|
|Drift||O2 at constant temperature and [O2] <0.02% per hr; CO2 at constant temperature and O% [CO2] <0.001% per hr; H2O at constant temperature with constant N2 flow < 0.01% RH/hr|
|Weight||FMS 9 lbs (4 kg); Expansion Box 2 lbs (1 kg)|
|Dimensions||FMS L: 14 in (35 cm), W: 12in (30 cm),
H: 6 in (15 cm); Expansion Box L: 7in (17 cm),
W: 7 in (17 cm), H: 3 in (7 cm)
|Power Requirements||12-15 VDC nominal, 225-850mA consumption, universal AC adapter supplied|
|Flow Rate||10-1,500 mL/min|
|Flow Accuracy||2% of reading, typical|
|Flow Resolution||0.1 mL/min from 0-99.9 mL/min, 1 mL/min above 100 mL/min|
|Analog Inputs||Eight bipolar analog inputs for voltage standard|
|Analog Outputs||Eight 0-5V outputs, for user-configurable ranges|
|Digital Data Outputs||RS-232 from USB port, SableBus from 5-pin DIN|
|Digital control outputs||8 TTL logic signals|
|Internal Data Storage||SD Card (up to 32 GB)|
|Recording Interval||User selectable from 0.1 sec to 1 hr|
|Operating Conditions||3-50° C, non-condensing|
|Storage conditions||3-60° C|